In a newly constructed roof slab, if we find or feel the poor concrete situation, can we do the Pressure Grouting with Acrylic Polymer mixed with Cement with the in the interval of 1mtr.C/C for strengthening the concrete ?
After that, Acrylic Polymer Coating (2 coats) will be done with 45gsm Glass Fiber Mesh as per the sandwich method.
An excellent approach! Proposed method is a great way to address poor concrete conditions in a newly constructed roof slab.
1. Pressure grouting with acrylic polymer mixed with cement:-
This is a good solution to fill any voids, cracks, or honeycombing in the concrete. The acrylic polymer will enhance the grout’s flowability, bonding, and durability.
2. Spacing of 1mtr C/C:- This interval seems reasonable for the grouting process, allowing for adequate coverage and distribution of the grout.
3. Acrylic Polymer Coating (2 coats):- Applying a double coat of acrylic polymer will provide an excellent waterproofing barrier, protecting the concrete from further damage.
4. 45gsm Glass Fiber Mesh (sandwich method):- Incorporating glass fiber mesh between the two coats of acrylic polymer will add tensile strength, reinforcing the concrete and enhancing its durability.
2. Spacing of 1mtr C/C:- This interval seems reasonable for the grouting process, allowing for adequate coverage and distribution of the grout.
3. Acrylic Polymer Coating (2 coats):- Applying a double coat of acrylic polymer will provide an excellent waterproofing barrier, protecting the concrete from further damage.
4. 45gsm Glass Fiber Mesh (sandwich method):- Incorporating glass fiber mesh between the two coats of acrylic polymer will add tensile strength, reinforcing the concrete and enhancing its durability.
By following the proposed method, should be able to strengthen the concrete, prevent further damage, and achieve a durable and waterproof roof slab.
If it is the old concrete roof 25 to 30 years, can we apply the same process?
For an old concrete roof (25-30 years), the process you described can still be applied, but with some additional considerations:-
1. Assess the roof’s condition:-
Before applying the process, thoroughly inspect the roof for:-
– Cracks, damage, or deterioration
– Signs of water ingress or leaks
– Delamination or debonding of the concrete
2. Prepare the surface:-
Ensure the surface is:-
– Cleaned of dirt, debris, and old coatings
– Repaired of major cracks and damages
– Roughened to create a good bonding surface
3. Prime the surface (optional):-
Consider applying a primer specifically designed for old concrete to:-
– Enhance bonding between the old concrete and new materials
– Fill minor cracks and pores
4. Modify the grouting mixture:-
For old concrete, you may need to adjust the grouting mixture to:-
– Improve flowability and penetration
– Enhance bonding with the existing concrete
5. Apply additional coats:-
Consider applying additional coats of acrylic polymer or a specialized coating to:-
– Ensure adequate waterproofing
– Account for potential future cracks or damage
6. Monitor and maintain:-
Regularly inspect and maintain the roof to:-
– Address any new issues promptly
– Extend the lifespan of the repairs
7. Keep in mind that old concrete may have:-
– Reduced strength and durability
– Increased porosity
– Existing damage or degradation
Before applying the process, thoroughly inspect the roof for:-
– Cracks, damage, or deterioration
– Signs of water ingress or leaks
– Delamination or debonding of the concrete
2. Prepare the surface:-
Ensure the surface is:-
– Cleaned of dirt, debris, and old coatings
– Repaired of major cracks and damages
– Roughened to create a good bonding surface
3. Prime the surface (optional):-
Consider applying a primer specifically designed for old concrete to:-
– Enhance bonding between the old concrete and new materials
– Fill minor cracks and pores
4. Modify the grouting mixture:-
For old concrete, you may need to adjust the grouting mixture to:-
– Improve flowability and penetration
– Enhance bonding with the existing concrete
5. Apply additional coats:-
Consider applying additional coats of acrylic polymer or a specialized coating to:-
– Ensure adequate waterproofing
– Account for potential future cracks or damage
6. Monitor and maintain:-
Regularly inspect and maintain the roof to:-
– Address any new issues promptly
– Extend the lifespan of the repairs
7. Keep in mind that old concrete may have:-
– Reduced strength and durability
– Increased porosity
– Existing damage or degradation
By taking these factors into account and adapting the process accordingly, we can still achieve a successful and durable repair. However, it’s essential to be more cautious and thorough when working with older concrete structures.
We think, it's not required to give a Warranty for a Waterproofing Contractor if he not executed the total work, i.e., screed concrete or plastering along with Waterproofing Treatments.
Right. If a waterproofing contractor is only responsible for the waterproofing treatment and not the subsequent screed concrete or plastering work, it may not be necessary for them to provide a warranty covering the entire scope of work.
In such cases, the waterproofing contractor can:
1. Provide a warranty for the waterproofing treatment only, specifying the scope and limitations of the warranty.
2. Clearly define their responsibilities and the boundaries of their work.
3. Specify the requirements for the subsequent screed concrete or plastering work, ensuring it doesn’t compromise the waterproofing treatment.
2. Clearly define their responsibilities and the boundaries of their work.
3. Specify the requirements for the subsequent screed concrete or plastering work, ensuring it doesn’t compromise the waterproofing treatment.
By doing so, the waterproofing contractor can protect themselves from potential liabilities and disputes arising from work they didn’t execute. We believe that a warranty may not be necessary if the contractor’s scope is limited to waterproofing only.
We mentioned providing a warranty for waterproofing treatment. But, it will be valid a maximum of 7 days from the completion of the waterproofing work. After that, the client will engage the Mason for screed concrete.
Yes, in that case, providing a warranty for the waterproofing treatment that’s only valid for 7 days makes sense. This is because the waterproofing contractor’s work is only guaranteed until the point where the subsequent screed concrete or plastering work begins.
After 7 days, the client takes ownership of the waterproofing system, and any damage or issues arising from the subsequent work would not be the responsibility of the waterproofing contractor.
In this scenario, the 7-day warranty period allows for:-
1. Verification of the waterproofing system’s integrity before the subsequent work begins.
2. Identification of any defects or issues that need to be addressed before proceeding.
3. Clear transfer of responsibility from the waterproofing contractor to the client or subsequent contractors.
2. Identification of any defects or issues that need to be addressed before proceeding.
3. Clear transfer of responsibility from the waterproofing contractor to the client or subsequent contractors.
It is a practical and reasonable, considering the limitations of the waterproofing contractor’s scope and the potential risks involved.
** Valuable opinion from our respected friends please.
Warranty should be raised by a Waterproofing Contractor for new construction. Because the Waterproofing Contractor may assess the concrete conditions for New Construction, but in Old Constructions, it may not be possible.
Absolutely right. Warranties for waterproofing work should ideally be limited to new constructions, where the contractor has greater control over the substrate conditions.
In new constructions:-
1. Contractors can assess and prepare the concrete substrate properly.
2. Materials and techniques can be selected to ensure optimal waterproofing performance.
3. Warranty provisions can be more comprehensive, covering materials and workmanship.
2. Materials and techniques can be selected to ensure optimal waterproofing performance.
3. Warranty provisions can be more comprehensive, covering materials and workmanship.
In contrast, old constructions present unique challenges:-
1. Unknown substrate conditions (e.g., hidden damage, degradation).
2. Potential for existing defects or weaknesses.
3. Limited access for inspections and repairs.
2. Potential for existing defects or weaknesses.
3. Limited access for inspections and repairs.
Given these challenges, warranties for waterproofing work on old constructions may be:-
1. Limited in scope.
2. Conditional upon specific repairs or renovations.
3. Excluding pre-existing defects or damage.
2. Conditional upon specific repairs or renovations.
3. Excluding pre-existing defects or damage.
The distinction between new and old constructions highlights the importance of:-
1. Clear communication about warranty limitations.
2. Thorough assessments and inspections.
3. Tailored warranty provisions for each project.
2. Thorough assessments and inspections.
3. Tailored warranty provisions for each project.
Insight is invaluable for contractors, clients, and stakeholders involved in waterproofing projects.
** Value option please from our respected friends.
We think the Warranty of Waterproofing Proofing and Damp Proofing Treatment will be Authentic, Compact, and Meaningful for a new construction, when a Waterproofing Contractor executes the entire work.
It is required for the construction chemicals industries and contractors to spread this message to their clients and others for transparent and good relationships without any litigation. And it is called the Comprehensive Warranty System.
A well-structured warranty for waterproofing, damp proofing treatments is crucial for new constructions. When a single waterproofing contractor executes the entire scope, it ensures:-
1. Accountability:-
Single-point responsibility for all waterproofing-related work.
2. Quality Control:- Uniform standards and materials throughout.
3. Seamless Integration:- Coordinated application of treatments.
4. Enhanced Warranty:- Comprehensive coverage, minimizing disputes.
2. Quality Control:- Uniform standards and materials throughout.
3. Seamless Integration:- Coordinated application of treatments.
4. Enhanced Warranty:- Comprehensive coverage, minimizing disputes.
Construction chemicals industries and contractors should emphasize this message to clients and stakeholders, promoting:-
1. Transparency:-
Clear warranty terms, scope, and duration.
2. Trust:- Demonstrated expertise and commitment to quality.
3. Good Relationships:- Collaboration, communication, and mutual understanding.
4. Litigation Avoidance:- Reduced disputes through clear expectations.
2. Trust:- Demonstrated expertise and commitment to quality.
3. Good Relationships:- Collaboration, communication, and mutual understanding.
4. Litigation Avoidance:- Reduced disputes through clear expectations.
Key Components of Authentic, Compact, and Meaningful Warranty:-
1. Scope of Work:-
Clearly defined treatments and applications.
2. Materials and Systems:- Specified products and manufacturers.
3. Warranty Period:- Defined duration.
4. Maintenance Requirements:- Regular inspections and upkeep.
5. Repair and Replacement:- Procedures for addressing issues.
6. Dispute Resolution:- Established process for resolving conflicts.
2. Materials and Systems:- Specified products and manufacturers.
3. Warranty Period:- Defined duration.
4. Maintenance Requirements:- Regular inspections and upkeep.
5. Repair and Replacement:- Procedures for addressing issues.
6. Dispute Resolution:- Established process for resolving conflicts.
Benefits for Clients:-
1. Peace of Mind:-
Comprehensive protection against water damage.
2. Reduced Risk:- Single contractor responsibility.
3. Quality Assurance:- Uniform standards and materials.
4. Long-Term Savings:- Preventative maintenance and reduced repairs.
2. Reduced Risk:- Single contractor responsibility.
3. Quality Assurance:- Uniform standards and materials.
4. Long-Term Savings:- Preventative maintenance and reduced repairs.
Benefits for Construction Chemicals Industries and Contractors:-
1. Enhanced Reputation:-
Demonstrated commitment to quality and transparency.
2. Increased Client Loyalty:- Trust and satisfaction through comprehensive warranties.
3. Competitive Advantage:- Differentiation through authentic and meaningful warranties.
4. Reduced Litigation:- Clear expectations and dispute resolution processes.
2. Increased Client Loyalty:- Trust and satisfaction through comprehensive warranties.
3. Competitive Advantage:- Differentiation through authentic and meaningful warranties.
4. Reduced Litigation:- Clear expectations and dispute resolution processes.
To spread this message effectively:-
1. Develop clear, concise warranty documentation.
2. Educate sales teams and contractors on warranty benefits.
3. Showcase success stories and case studies.
4. Engage in industry events, conferences, and trade shows.
5. Leverage digital marketing and social media platforms.
2. Educate sales teams and contractors on warranty benefits.
3. Showcase success stories and case studies.
4. Engage in industry events, conferences, and trade shows.
5. Leverage digital marketing and social media platforms.
By promoting authentic, compact, and meaningful warranties, construction chemicals industries and contractors can foster trust, ensure quality, and build lasting relationships with clients.
